BRICK POINTING METHODS FOR NEW AND OLD BRICKWORK

Brick Pointing Methods For New and Old Brickwork

Brick Pointing Methods For New and Old Brickwork

Blog Article

Brick pointing is the tactic of applying a little level of mortar into your experience joint between bricks. These bricks can both be freshly laid ones or outdated brickwork. In new brickwork, pointing is finished to apply tougher mortar to extend weather safety to the exposed faces. In previous brickwork, the tactic is used to mend the mortar joints which were eroded by publicity to varied aspects.

For laying new and outdated brickwork, there are many approaches that should be adopted as a way to do the process thoroughly.

On new brickwork, brick pointing ought to be accomplished at practical intervals. Breaks at practical factors need to be held to permit enough time for cleaning out the surface mortar from the area. The mortar inside the joints needs to be scraped into a depth of about 12 mm from your brick floor. A wall can only be pointed when it's been accomplished.

Regarding outdated brickwork, the critical brick pointing tactics involve chipping out the aged mortar and pointing it to the suitable depth. The typical depth is twelve mm through the brick surface area. In taking away the previous mortar, angle grinders tend to be utilized. Consider note that the method will lead to plenty of dust, so that you better put on face mask and goggles as you do The work.

As soon as the wall is able to be pointed, the brick pointing approaches with the mortar follows. Be sure that the joints are wetted initially ahead of becoming filled with the pointing mortar.

Make a reasonably rigid combination of the mortar and set a little total with a hawk. In removing slithers of mortar, a little pointing trowel can be employed. Keep the mortar up on the sting with the trowel and push it in the Brickwork Queens joints being crammed. Then, thoroughly attract the blade backwards. Repeat the techniques until eventually the mortar is flushed Along with the deal with of your bricks.

Do the brick pointing approaches by filling the vertical cross-joints initially, accompanied by the horizontal mattress-joints. When a lot more than a sq. meter has become stuffed, end it using the needed fashion.

Report this page